In my different Interior Design Projects, I have many cases which require a high end paint application. One Company I always can count on with perfect color match and superior paint quality is Fine Paints of Europe. 
As I have been quite successful with their European paint products, I thought it would be great to give out some detailed hints for a perfect paint job on a Front Entrance Door.
Please note the 32 Classic European Enamel Colors illustrated above are just part of the 4,000 colors available in a full range of glosses.
But now let’s start with the Job.
- Select the appropriate primer. Use Fine Paints of Europe Oil Primer/Undercoat or Eco Primer/Undercoat for wooden doors, Ferrous Metal Primer for steel doors and Key Primer for fiberglass doors.
- Wooden and steel doors should be sanded smooth with medium grit sandpaper(150) wrapped around household sponge or rubber sanding block - never sand without a backing. Fiberglass doors should be lightly sanded with fine sandpaper(220)
- Doors should be washed with powdered detergent and water, rinsed and allowed to dry thoroughly. Special care should be taken on wooden doors where unpainted wood is exposed to make certain that no moisture has been retained. Exposed wood will normally dry sufficiently in 72hours.
- Doors should be primed with appropriate primer. We recommend, I recommend, whenever possible, that the top and bottom of your door be primed as well to prevent moisture intrusion and extend the life of your finish. If using Key Primer, you should apply your Primer with an inexpensive, foam throwaway brush. Key Primer is to be thinned with water only - do not use Mineral Spirits.
- After allowing Primer to dry overnight (4hours for Key Primer), doors should be sanded glass smooth with the fine sandpaper wrapped around household sponge or rubber sanding block. Doors should be wiped clean with cotton rag containing a splash of Mineral Spirits.
- Apply first coat of Hollandlac Enamel in a thin, even fashion (as an option you may apply ECO), Allow first coat to dry overnight.
- Sand door again with 220sandpaper to remove imperfections and provide good “tooth” for final coat. Once again, “tack” the door to remove dust with a clean cotton cloth
- Apply final coat of HollandLac Enamel or Eco. Work quickly and do not go back on your work in an attempt to eliminate brush strokes as they will normally level out within 15 minutes of application. Second coat should provide total opacity. For additional durability and extended life, apply a third coat to the door’s exterior (optional).
By following these simple instructions, even a “first time painter” can expect beautiful, professional quality results and a finish that will look newly painted for several years. When painting doors which are in poor condition I suggest that you consider the use of ultra high-build Brushing Putty applied and sanded according to instructions. This primer will eliminate dents and dings and dramatically improve the appearance of your finished Door.
Posted by Admin at 09:15 PM. Filed under: Color •
(0) Comments • (0) Trackbacks • Permalink